Valhax by Ragnar

The Story

One discipline: stay put.

Grease has one quiet job — to be there, still working, long after it was applied. Under load, through heat, against water, it must not flee the surface it was trusted to protect.

Valhax is built around that single job, eleven ways. Each grade is matched to a load, a temperature and a contaminant: the soap, the base oil and the solid lubricant chosen on purpose, never by default.

From a quiet everyday bearing to a racing hub at the edge of its tolerance, there is a Valhax that stays exactly where it is put.

The Range

Made for the task, not the shelf.

Each Valhax product is built for one job and judged on how well it does it. Product images drop in here as they are shot.

Product
image

Valhax

Valhax Standard

Lithium complex, NLGI 2. The dependable all-rounder for general bearings and everyday load. Where most jobs begin.

Lithium CxNLGI 2General

Product
image

Valhax

Valhax Pro

MoS₂-fortified for high load and shock. Lays a sacrificial film that protects when the pressure spikes past what oil alone can carry.

MoS₂High LoadAnti-Wear

Product
image

Valhax

Valhax Plus

Polyurea synthetic for high temperature and long life. Holds its structure where conventional soaps would soften and run.

PolyureaHigh TempLong Life

Product
image

Valhax

Valhax Racing

WS₂ and MoS₂ in synthetic base — extreme pressure for racing bearings working at the edge of tolerance.

WS₂ · MoS₂Extreme PressureRacing

Product
image

Valhax

Valhax Ceramic Assembly

hBN-based anti-seize for carbon and titanium interfaces. Protects the joints a modern build cannot afford to seize.

hBNAnti-SeizeCarbon · Ti

Product
image

Valhax

Valhax Freehub

Tuned for the pawls and ratchets of a freehub — low drag engagement, water resistance, protection through the wet months.

CyclingLow DragWater-Resistant

Product
image

Valhax

Valhax Arctic Syn

Biodegradable synthetic rated to −70°C. For the cold no ordinary grease survives, without harming the ground it touches.

−70°CBiodegradableSynthetic

Product
image

Valhax

Valhax Mountain Bike

CSC 2 with PTFE — built to resist water and mud where a mountain bike spends its hardest days.

CSC 2 · PTFEMud-ResistantMTB

Product
image

Valhax

Valhax Bio

Natural-based and biodegradable, for use near water and soil where what runs off matters as much as what stays on.

Bio-BaseBiodegradableEco

Choose

Match the grease to the load.

→ Valhax Standard

Everyday

General bearings, even load, ordinary conditions. The reliable default for most of what turns.

→ Valhax Pro

Hard Use

Shock load, high pressure, the bearings that take a beating. MoS₂ for when oil alone gives up.

→ Valhax Racing

Extreme

The edge of tolerance — racing hubs, high heat, pressures that need a synthetic answer.

Fenrir

Cycling

The chain lubricants that pair with Valhax greases for a complete drivetrain.

Enter Fenrir

Godspeed

Bearings

When the job calls for oil over grease — high-speed, low-drag bearing fluid.

Enter Godspeed

Ulfberht

Protection

Anti-seize and rust defence for the interfaces grease alone does not cover.

Enter Ulfberht

Buy Direct

The full Valhax range on Lubricants Hub.

Every Valhax product, alongside the rest of the Ragnar house and our sister brands. Filter by discipline, compare by specification, buy direct.

Shop Valhax on Hub